Fire safety guidance on artificial foliage in commercial premises
Navigation
Section
Fire safety control measures
To mitigate the identified risks, enforcing authorities should ensure that Responsible Persons have implemented appropriate fire safety control measures for artificial foliage. Key controls include:
- Material selection and substitution: Ideally, premises should use artificial foliage manufactured using materials or additives intended to provide flame-retardant properties as part of the manufacturing process, without the need for post-installation treatment. If a flame-retardant treatment is used, the Responsible Person should ensure that the products are treated with an appropriate flame-retardant treatment (spray or dip) and obtain evidence of its effectiveness, such as appropriate test evidence or certificates. Ideally, this treatment should be applied by a competent person. Enforcement officers should verify any claims of “fire-rated” material by checking for appropriate documentation. Highly flammable materials that cannot be made flame-retardant should be avoided or removed in high-risk locations.
- Installation and layout. The positioning of artificial foliage is an important consideration
Key principles include:
- Keep foliage away from ignition sources: Artificial foliage should not be placed near known heat or flame sources, such as candles, stage effects, kitchen open flames, electric heaters or high-wattage lights. The premises fire risk assessment or manufacturer’s guidance should assist in determining a safe separation distance or if a physical barrier should be maintained. A safe separation distance or physical barriers should be maintained.
- Avoid escape routes and exits: Do not install artificial foliage in critical escape paths, such as corridors, stair enclosures or above exit doors. In an evacuation, such materials could ignite and compromise the escape route with smoke or debris.
- Prevent obstruction of safety features: Ensure that artificial foliage does not cover or impede smoke detectors, sprinkler heads, alarm flashing beacons, emergency lights, exit signs or ventilation grilles, etc. Decorations must also be securely fixed. Loose or poorly attached installations might fall and block an exit if disturbed by fire or during an evacuation.
- Limit the potential fire size: The size, density and continuity of artificial foliage installations should be carefully controlled and proportionate to the level of fire protection provided within the premises. Extensive, uninterrupted foliage features can create a significant fuel load and may allow fire to spread rapidly across walls, ceilings or other surfaces. Large-scale installations, particularly overhead canopies and ceiling coverings, should be avoided. Where extensive artificial foliage is proposed, it should be divided into smaller, discrete sections with suitable gaps or fire breaks to reduce the potential for fire spread. A continuous artificial foliage canopy presents a greater fire risk than several smaller, separated decorative features, as fire breaks can help limit flame spread and reduce the rate of fire development.
- Flame-retardant treatment and maintenance: For artificial foliage that relies on flame-retardant treatments applied after manufacture, enforcement officers should verify that an appropriate maintenance regime is in place. Treatments can lose effectiveness over time and with cleaning. Premises should re-treat foliage periodically with a suitable product. Any retreatment should be carried out in accordance with the manufacturer’s or treatment provider’s specified maintenance and retreatment requirements. Records should be kept of treatment dates, products used and appropriate certificates for inspection. Signs of deterioration, such as accumulated dust, which itself adds combustibility, faded or worn coatings, or physical damage to the foliage, should prompt early retreatment or replacement. Any applied treatment should provide full coverage in line with the product recommendations, including on foliage or decorative coverings with complex or intricate geometry. Enforcement officers can advise Responsible Persons to consult the manufacturers of the foliage or treatment for guidance on product lifespan and retreatment intervals.
4. Housekeeping and operational controls:
The presence of artificial foliage increases the need for strict control of ignition sources on the premises. Enforcement officers should look for policies or staff training around safe use of candles, pyrotechnics, sparklers or other open flames where artificial foliage is present. Additional precautions might include restricting certain high-risk effects, such as indoor fireworks, or requiring them to be used only under specific conditions. These could include maintaining a safe distance from overhead decorations and having fire extinguishers available. Staff should understand the additional fire risk and know how to respond quickly to any small fires involving decorative materials. Management should also ensure that emergency plans, including evacuation drills, consider a fire involving a decorative installation so that staff are prepared to manage evacuation effectively.
Fire risk assessment and documentation
Because artificial foliage and other decorative materials can materially affect fire behaviour, they should be considered in the premises’ fire risk assessment (FRA). Enforcing authorities should confirm that the FRA considers the potential risks associated with these decorations and evaluates:
- The potential ignition sources and likelihood of fire involving the foliage.
- The fire load contribution and potential for rapid flame spread and smoke generation.
- The potential impact on means of escape, including reduced visibility and physical obstruction, if the foliage were to catch fire.
- The effectiveness of detection and suppression systems, taking account of the location of the installation. For example, consider whether a ceiling canopy is positioned above or below sprinkler heads.
- The suitability of the materials and appropriate test evidence of their fire performance that reflects the intended use.
- The need for ongoing inspection and maintenance of the installation, including cleaning, reapplication of flame-retardant treatment and periodic renewal of decorations if their fire performance degrades.
The FRA should be conducted by a competent person and kept up to date. Introducing significant artificial foliage or making changes, such as adding a large seasonal display, should trigger an FRA review. Enforcement officers may request to see the FRA to verify that such installations have been assessed and the associated risks are being managed and documented.
Enforcement inspections should include reviewing documentation such as appropriate certification or test reports relating to the fire performance of the materials, treatment records, maintenance logs and evidence of staff training on managing decorative fire hazards. Well-kept records and a thorough risk assessment indicate a proactive safety culture, while their absence could suggest significant non-compliance.